Before use, carefully read and follow the instructions on the packaging.
Remove all rust from damaged areas, clean surface thoroughly and sand
Area must be dry and free of grease and dust
Clean undercoat with ColorMatic Silicone Remover (Art. No. 174469)
Shake the can well for 2 minutes
Carry out test spray
Spray 1 - 2 coats when used as a primer
Spray one light coat when used as a welding primer
After airing for 10-50 minutes (20 ° C), with one of the following products can be continued on demand: ColorMatic 1K Fillers, 1K Primer Fillers HG2-HG6, HG8 (not HG1 and HG7!), 2K Hi-Speed Primer