Before use, carefully read and follow the instructions on the packaging.
Bring the aerosol to room temperature, ideally between 15°C and 25°C
Mask off any areas that need not be sprayed
Wear an appropriate respirator (recommended type A2/P3)
The hardener is inside a separate inner compound of the aerosol
To mix the hardener, first put the container upside down onto a flat surface and remove the protective cap
Then take out the metal ring and insert through the pin, then pull until it doesn't go any further
By turning the ring around 360°, the inner compound opens, releasing the hardener
Important: vigorously shake the can for 3 min. upon hearing the mixing balls
Spray the clear coat onto the headlight in 1 to 2 spraying passes, to high gloss, at a distance of 15-20 cm from the surface, waiting ca. 2 minutes between each spraying pass
After ca. 5 minutes, the clear coat is dust dry and after ca. 7 hrs. (20°C) fully dry
