ColorMatic 2K Clear Sealer is a high-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering.
transparent
high gloss
200 ML | 500 ML
Characteristics
High-gloss, extremely scratch-resistant 2-component clear coat with very high resistance to petrol, UV rays and weathering
Safe long-term corrosion and oxidation protection on metal substrates such as steel, zinc, aluminum, copper, brass, as well as ground and brushed stainless steel
Before use, carefully read and follow the instructions on the packaging.
Shake can well until the audible noise of the mixing balls. Remove the protection cap from the bottom of the can and pull the pin out fully with the help of the inserted ring. This will release the knife, which will penetrate the wall of the aluminium cartridge
The cartridge will then rotate 360 °, be completely open and release the hardener
Shake the can to mix the A components with the hardener in the proper, predetermined ratio
Shake the can well for 2 minutes
Carry out test spray
Base coatings can be recoated with ColorMatic 2K Hi-Speed Clear Sealer after drying for 30 minutes
