2K Hi-Speed Clear Sealer for high quality matt surfaces and extremely abrasion-resistant with the highest resistance to petrol, UV rays and the effects of weather.
transparent
flat matt
200 ML
Characteristics
Special effect coating for tuning parts
Wheels in high class matt finish
Coating for plastic parts
A high-gloss, extremely scratch-resistant 2-component clear coat – highly fuel-resistant, resistant to U.V. rays and weather influences
Before use, carefully read and follow the instructions on the packaging.
Shake can well until the audible noise of the mixing balls. Remove the protection cap from the bottom of the can and pull the pin out fully with the help of the inserted ring. This will release the knife, which will penetrate the wall of the aluminium cartridge
The cartridge will then rotate 360 °, be completely open and release the hardener
Shake the can to mix the A components with the hardener in the proper, predetermined ratio
Shake the can well for 2 minutes
Carry out test spray
Base coatings can be coated with ColorMatic 2K Hi-Speed Clear Sealer matt once they have dried for 30 minutes (if surface is dust-dry)
Spray 2 - 3 full coats (45µ)
Leave to dry for 3 minutes between coats
For an optimal coating result bring can to temperature prior to use (20 - 25 °C) and a relative air humidity of 45 - 60%. Please note: a high air humidity can cause loss of gloss.
