2K Hi-Speed Clear Sealer Satin Gloss

ColorMatic 2K Clear Sealer is a extremely scratch-resistant 2-component clear coat.

  • transparent
  • semi gloss
  • 200 ML

Characteristics

  • Special effect coating for tuning parts
  • Spot coating for plastic parts
  • Coating for plastic parts
  • A high-gloss, extremely scratch-resistant 2-component clear coat – highly fuel-resistant, resistant to U.V. rays and weather influences
  • Provides gloss effect with 50 ° / 60 ° in OEM quality
  • Very good scratch resistance
  • Long pot life
  • Very good flow
  • Convenient 200 ml can to avoid leftover

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. Shake can well until the audible noise of the mixing balls. Remove the protection cap from the bottom of the can and pull the pin out fully with the help of the inserted ring. This will release the knife, which will penetrate the wall of the aluminium cartridge
  2. The cartridge will then rotate 360 °, be completely open and release the hardener
  3. Shake the can to mix the A components with the hardener in the proper, predetermined ratio
  4. Shake the can well for 2 minutes
  5. Carry out test spray
  6. Base coatings can be coated ColorMatic 2K Hi-Speed Clear Sealer satin gloss once they have dried for 30 minutes
  7. Spray 2 - 3 full coats (50µ)
  8. Leave to dry for 2 minutes between coats
  9. For an optimal coating result bring can to temperature prior to use (20 - 25 °C) and a relative air humidity of 45 - 60%. Please note: a high air humidity can cause loss of gloss.

Choose your language