2K Slow-Speed Clear Sealer High Gloss

The ColorMatic 2K Slow-Speed clear coat provides through the long hardener at larger areas ideal application advantages.

  • transparent
  • high gloss
  • 500 ML | 200 ML

Characteristics

  • Decelerated drying time, therefore the painting of larger areas is possible
  • Safe long-term corrosion and oxidation protection on metal substrates such as steel, zinc, aluminum, copper, brass, as well as ground and brushed stainless steel
  • Ideal for the painting at higher ambient temperatures (25°C - 35°C)
  • Very high resistance to petrol, UV rays and weathering
  • Brillant gloss
  • Long pot life
  • Very good flow
  • Easy to polish
  • Best to use 200 ml can to avoid surplus

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. Shake can well until the audible noise of the mixing balls. Remove the protection cap from the bottom of the can and pull the pin out fully with the help of the inserted ring. This will release the knife, which will penetrate the wall of the aluminium cartridge
  2. The cartridge will then rotate 360 °, be completely open and release the hardener
  3. Shake the can to mix the A components with the hardener in the proper, predetermined ratio
  4. Shake the can well for 2 minutes
  5. Carry out test spray
  6. Base coatings can be recoated with ColorMatic 2K Hi-Speed Clear Sealer after drying for 30 minutes
  7. Spray 2 - 3 full coats (50µ)
  8. Leave to dry for 5 minutes between coats

Choose your language