Pre-fill system water-based

The ColorMatic pre-fill water-based spray paint can is prefilled with propellant and specific additives and then filled by VitoMat filling machines with the desired coat.

  • gloss
  • 230 ML | 261 ML | 218 ML | 273 ML | 300 ML | 284 ML | 201 ML | 290 ML

Characteristics

  • A spray can pre-filled with propellants and specific additives. The water-based coat is transferred into the can by a filling device, producing a ready-to-use end product
  • High coverage
  • Simple, time-saving application
  • Excellent atomisation
  • Light blending
  • Suitable for filling with all ColorMatic filling machines
  • The dealer adds the desired coat colour and is, therefore, liable for the final product

Technical Data Sheet

Safety data sheet(s)

Usage instructions

Before use, carefully read and follow the instructions on the packaging.

  1. Pre-treat undercoat with a basecoat as usual and clean with ColorMatic silicone remover (Art. No 174469)
  2. Shake the can well for 2 minutes
  3. Carry out test spray
  4. Base coats must be coated with ColorMatic 2K hi-speed clear coat high gloss (Art. No. 187216, or satin gloss Art. No. 231650)
  5. Surface can be re-coated after 30 min drying-time
  6. Spray 2 -3 full coats (50µ)
  7. Leave to dry for 2 minutes between coats

Choose your language